ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 53)

Gold Hawk Installation Guide Installation
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
53
Pin (J2) Signal Function
2 PortC_ENCO_A- Buffered Channel A- output/Pulse-/PWM-
4 PortC_ENCO_A+ Buffered Channel A+ output / Pulse+/PWM+
6 PortC_ENCO_B- Buffered Channel B- output / Dir-
8 PortC_ENCO_B+ Buffered Channel B+ output / Dir+
10 PortC_ENCO_INDEX- Buffered Channel INDEX- output
12 PortC_ENCO_INDEX+ Buffered Channel INDEX+ output
Table 14: Port C Pin Assignment
Figure 24: Emulated Encoder Differential Output – Recommended Connection Diagram
4.9.4. Analog Input
An analog user input can be configured by software to be used as either tachometer velocity
sensor input or potentiometer position feedback. For connection diagrams refer to
Section 4.10.3.