ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 80)

Gold Hawk Installation Guide Technical Specifications
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
80
5.4.2. Digital Output Interface – TTL Mode
There are 2 types of outputs:
• OUT1 and OUT2 are optically isolated outputs
• OUT3 and OUT4 are TTL 3.3V non isolated outputs
5.4.2.1. OUT1 and OUT2
The following table describes the electrical specification of theOUT1 and OUT2 outputs:
Feature Details
Type of output • Optically isolated
• Source/Sink
Maximum supply output (VCC) 30 V
Max. output current
I
out
(max) (V
out
= Low)
7 mA
VOL at maximum output voltage
(low level) V
out
(on) ≤ 0.4 V
R
L
The external resistor R
L
must be selected to limit the
output current to no more than 7 mA.
Executable time 0 < T < 250 µsec
Figure 41: Digital Output Schematic