ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 84)

Gold Hawk Installation Guide Gold Line Standards
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
84
Chapter 6: Gold Line Standards
The Gold Hawk servo drive has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for any
deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or ensuring
that regulatory requirements are met.
6.1. Functional Safety
Safe Torque Off (STO)
Safety Standard Item
The related standards below apply to the performance of the servo drives as stated in the
environmental conditions section 3.2
IEC 61800-5-2:2007 SIL 3 Adjustable speed electrical power drive systems –
Safety requirements – Functional
EN ISO 13849-1:2008 Cat 3, PL e Safety of machinery — Safety-related parts of control
systems.
EN 61508-1:2010 SIL 3 Functional safety of electrical/electronic/
programmable electronic safety-related systems
EN 61508-2:2010 SIL 3 Functional safety of electrical/electronic/
programmable electronic safety-related systems
EN 61508-3:2010 SIL 3 Functional safety of electrical/electronic/
programmable electronic safety-related systems