ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 38)

Gold Hawk Installation Guide Installation
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
38
Figure 9: Main Power Supply Connection Diagram (no Auxiliary Supply)
4.7.3. Auxiliary Power Supply (Optional)
Note: The source of the Auxiliary Supply must be isolated.
Connect the VL and PR pins on the Gold Hawk in the manner described in Section 4.5
“Integrating the Gold Hawk on a PCB”.
Pin Function Pin Positions
VL Auxiliary Supply Input
PR Auxiliary Supply Return
Caution: Power from the Gold Hawk to the motor must come from the Main
Supply and not from the Auxiliary Supply.