ElmoMC SimplIQ Digital Servo Drives-Bell Installation Guide - Manual (Page 10)

Bell Installation Guide Safety Information
MAN-BELIG Ver. 1.302
10
1.4. CE Mark Conformance
The Bell stepper drive is intended for incorporation in a machine or end product. The actual end
product must at a minimum comply with all safety aspects of the relevant requirements of the
European Safety of Machinery Directive 98/37/EC as amended, and with those of the most recent
versions of standards EN60204-1 and EN292-2.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the Bell
meets the provisions outlined in Council Directive 73/23/EEC. The party responsible for ensuring
that the equipment meets the limits required by EMC regulations is the manufacturer of the end
product.
1.5. Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
time of installation, or 18 months from time of shipment, whichever comes first. No other
warranties, expressed or implied — including a warranty of merchantability and fitness for a
particular purpose — extend beyond this warranty.