ElmoMC SimplIQ Digital Servo Drives-Bell Installation Guide - Manual (Page 46)

Bell Installation Guide Bell Technical Specifications
MAN-BELIG (Ver. 1.302)
| www.elmomc.com
46
Table of Contents
4.2. Power Ratings
Feature Units 5/100
Minimum supply voltage (VP+) VDC 11
Nominal supply voltage (VP+) VDC 85
Maximum supply voltage (VP+) VDC 95
Efficiency at rated power % > 99
Output voltage % 90% VP
Note: This is the maximum amplitude value
Ts=50 μs)
Continuous phase current limit (Ic) A 5
Peak current limit (RMS) A 10
PWM switching frequency
kHz 20
Switching method Advanced Bipolar or Unipolar PWM
Weight g (oz)
45 g (1.59 oz)
Dimensions mm (in) 55 x 15 x 58.5 mm (2.165" x 0.591" x 2.303")
Mounting method
Soldered pins
Digital In / Digital Out / Analog In
6 / 2 / 1