ETC SmartFade v3.0.1 - Manual (Page 11)

Introduction 5
Operating Modes
Hold the power button during start-up to enter the Operating Modes menu. This allows you
to select different operating modes. No data is lost when changing modes, it will reappear
when the corresponding mode is selected again.
Action Console Feedback
1. Press and hold
(console must be off)
The LCD shows the Operating Modes menu.
2. Select mode Wheel >Full Control
All functions available
>DMXBackup
The console is a DMX backup for up to 512
outputs, levels are stored from an external
device sending to the DMX input.
>TwoScene mode
The console functions primarily as a tradi-
tional two-scene console.
3. Activate mode The console will enter the selected mode.
The console will continue to power up in this
mode until the mode is changed.