ETC SmartFade v3.0.1 - Manual (Page 20)

14 SmartFade v3.0.1 User Manual
LCD & Wheel Functions
The LCD menu provides quick access to functions.
Main functions.
LCD - Preview mode
In preview mode it’s possible to see programmed intensities for MEMS faders 1-24
Action Console Feedback
Activate menus
Scroll through choices Wheel Choices are shown over the wheel. Use the
Menu button again to move to subsequent
levels, and to accept setting changes.
Previous choice Return to previous menu level.
Exit Cancels out of the menus.
Action Console Feedback
Activate preview mode Bumps 1-24 start blinking. Press again to
deactivate preview mode.
Select fader ... The selected Bump stops blinking. The
LCD(s) will show intensities for the currently
selected fader mode.
<
<<
PRE
VIEW
1 24