ETC SmartFade v3.0.1 - Manual (Page 45)

3
Program 39
Stack
The Stack sequence is recorded and played back on the Crossfader. It is intended to be
the main cue list for a show. The Stack can contain up to 199 steps. Stack steps are
arranged as 199 incremental steps with up to 9 decimal insertions allowed between major
steps.
Each step of a Stack can contain one of two items:
• One single intensity channel.
• A memory from any of the 12 fader pages (or created on the fly)
• A unique Stack memory state (Que)
Step Times
Stack steps can have three times; Up, Down and Wait time. These times are adjusted on
the wheels during playback. They can also be set in the Sequence Time menu afterwards.
See “Sequence & Stack Times” on page 52.
The Stack button
When a Stack is recorded but not active, the STACK button will be dimly lit. Pressing
STACK will activate the stack for playback on the crossfaders and the button will light fully.
If there is no stack recorded, the button will be unlit.