Lenze HMI for visualisation / with control technology - Manual (Page 37)

Commissioning
Connecting external devices
7
l
37 LDCDS−EL100 EN 9.0
7 Commissioning
7.1 Connecting external devices
The HMI can communicate with other devices via different interfaces, e.g. to exchange
data or transfer projects:
EL 1xx PC
Simatic S7
LAN LAN
USB-B 1) USB-A
USB-A
CAN 2)
MPI 2)
2177IB
2173IB USB-A
MPI
LPT
COM1 1) COM
SD/SDHC
EL100−016
1) Not for EL 1xx ECO (PLC)
2) Optionally CAN or MPI (EL 1xx ECO: CAN only)
 EL 1xx « PC Ethernet connection, e.g. via cross−link cable
‚ EL 1xx « PC USB connection device−host (the Microsoft
â
"ActiveSync" software must be
installed on the PC.)
ƒ EL 1xx « PC Serial connection via serial cross−link cable
„ USB stick, external keyboard/mouse
SD/SDHC card
† EL 1xx « PC CAN bus connection with 2177IB (CAN to USB−A) or 2173IB (CAN to LPT
interface) PC bus adapter
‡ EL 1xx « S7 MPI connection