Lenze HMI for visualisation / with control technology User Manual
Page 73
Operation
Access EL 1xx via server functionality
Enable Server Access
l
73
LDCDS−EL100 EN 9.0
Enter the password for accessing the server
The access to all servers (except for the VNC Server) is protected by a common password
which must be assigned as described in the following.
How to proceed:
1. Click Start
® Settings ® Control Panel ® Owner on your EL1xx.
2. Enable the Network_ID Registry.
EL100−031
3. Enter a User Name and a Password. If the EL1xx is connected to a network domain,
enter its name, too.
)
Note!
ƒ
Memorise the user name and the password since this data will be queried
when logging into the server.
ƒ
If you are using an unsafe password or no password at all, data integrity
cannot be guaranteed.
4. Click OK to confirm your entries.
)
Note!
If a password has been assigned and this dialog is opened again, the
"Password" field will be cleared. However, the password has been saved.