Lenze HMI for visualisation / with control technology - Manual (Page 6)

About this documentation
Validity information
1
l
6 LDCDS−EL100 EN 9.0
0Fig. 0Tab. 0
1 About this documentation
1.1 Validity information
These instructions are valid for
HMI with CAN interface HMI with CAN interface, integrated
PLC and UPS HMI with MPI interface
EL 103 ECO EL 103 ECO PLC −
EL 105M CAN EL 105m PLC EL 105M MPI
EL 105 CAN EL 105 PLC EL 105 MPI
EL 106 CAN EL 106 PLC EL 106 MPI
EL 108 CAN EL 108 PLC EL 108 MPI
EL 110 CAN EL 110 PLC EL 110 MPI
EL 110s CAN EL 110s PLC EL 110s MPI
The nameplate is on the back of the device.
1.2 Target group
This documentation is directed at qualified skilled personnel according to IEC 60364.
Qualified skilled personnel are persons who have the required qualifications to carry out
all activities involved in installing, mounting, commissioning, and operating the product.