MK Diamond Scarifier - Manual (Page 15)

15
MK-Scarifier HaNDLeBar aSSeMBLY
Follow the assembly instructions to prepare your Scarifier for operation.
Handlebar adjustment
Adjust the Handlebar for for ease of operation and comfort of the user.
(A)
Locate the Handlebar retain-
ing bolts.
(B)
Remove the Retaining Bolts
using 9/16 wrenches and/or
sockets.
(C)
Raise or lower the Handle-
bar as needed.
(D)
Align one set of Retaining
Bolt holes in the Handlebar to
the holes in Scarifier Frame.
(E)
Install the Retaining Bolts
and tighten using 9/16
wrenches and/or sockets.
NOTe: Do not rotate saw to rest on handlebar. Engine damage will result.