MK Diamond Scarifier - Manual (Page 5)

5
MK-Scarifier SafeTY
aLWaYS place the power ON/OFF switch in the Off position when the saw is not in use.
ON / OFF
MaKe THe WOrKSHOP KiD PrOOf
Make the workshops kid proof by using padlocks, master switches or by removing starter keys.
DO NOT fOrce THe TOOL
A power tool will do a job better and safer operating at the rate for which it was designed.
USe THe rigHT TOOL
DO NOT force a tool or an attachment, to do a job that it was not designed to do.
USe THe PrOPer eXTeNSiON cOrD
If using an extension cord make sure it is in good condition first. When using an extension
cord, be sure to use one heavy enough to carry the current your product will draw. An under-
sized cord will cause a drop in line voltage that will result in a loss of power and overheating.
Page 9 shows the correct AWG size to use depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier
the cord.
USe PrOPer aPPareL
DO NOT wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may be
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to
contain long hair.
SecUre WOrK
Clamps or a vise should be used to hold work whenever practical. Keeping your hands free
to operate a power tool is safer.
DO NOT OVerreacH
Keep proper footing and balance at all times by not overreaching.
MaiNTaiN TOOLS WiTH care
Keep tools clean for the best and safest performance. Always follow maintenance instruc-
tions for lubricating, and when changing accessories.
DiScONNecT TOOLS
Power tools should always be disconnected before servicing or when changing accessories,
such as blades, bits, cutters, and the like.
KeeP cHiLDreN aWaY
All visitors and children should be kept a safe distance from work area.
aLWaYS wear approved respiratory, head, ear and eye protection
when operating this machine.
PerSONaL PrOTecTiVe eQUiPMeNT
ON
( (
)
) ON
( (
)
) ON
( (
)
)
ON
( (
)
)