MK Diamond Scarifier - Manual (Page 45)

45
MK-Scarifier MaiNTeNaNce
rear Wheel change Out
NOTe:
The two (2) Rear Wheels should be replaced at the same time (MK Diamond Part # 158520).
(A)
Rotate to rest on the Handle/
Stand.
(B)
Locate the Rear Wheel
Truck Assembly.
(C)
Remove the Rear Wheel
Truck Assembly Retain-
ing Nuts using 3/4-inch
wrenches.
(D)
Remove the Rear
Wheel Truck Assembly Re-
taining Bolts.
(E)
Lower the Rear Wheel Truck
Assembly.
(F)
Remove the Rear Wheel
Retaining Cotter Pin, Shim
Washer and Rear Wheel from
each side of the Assembly.
(G)
Obtain replacement wheels.
(H)
Install the new Rear Wheel,
Shim Washer and Cotter Pin
on each side of the Assem-
bly.
(I)
Install the Rear Wheel Truck
Assembly Retaining Nuts and
Bolts removed in Steps C
and D using
3/4-inch wrenches.