MK Diamond Scarifier - Manual (Page 47)

47
(J)
Locate the V-belt Adjust-
ing Screw inside the Cut-
ting Drum Well. Loosen the
screw using a 9/16-inch
wrench.
(K)
Remove the V-belt from the
Engine and Cutting Drum
Pulleys.
(L)
Clean and verify the align-
ment of the Engine and Cut-
ting Drum Pulleys.
(M)
Obtain and install a new
V-belt onto the Engine and
Cutting Drum Pulleys.
(N)
Verify the V-belt is seated in
all grooves of the Engine and
Cutting Drum Pulleys.
(O)
Pull the front of the Engine
Mounting Plate away from
the Frame to tension the
V-belt.
(P)
Tighten the V-belt Adjust-
ing Screw one turn using a
9/16-inch wrench.
(Q)
Verify the tension of the
V-belt (proper tension is
1/2-inch deflection of
the belt).
(R)
Repeat Steps P and Q until
proper tension has been
reached (proper tension is
1/2-inch deflection of the
belt).
MK-Scarifier MaiNTeNaNce