MK Diamond Scarifier - Manual (Page 16)

16
MK-Scarifier Scarifier DrUM
• Used for grinding, leveling, grooving, cleaning, and preparing concrete
• Five-point carbide tips (1-3/4” OD x 5/8” ID x 1/4”)
• Longer life than steel tooth cutters, average of 6000 to 8000 square feet
• Maximum cutting rate is 1/8” per pass
• Used for grinding, leveling, grooving, cleaning, and preparing concrete
• Five-point carbide tips (1-3/4” OD x 5/8” ID x 1/4”)
• Exceptional life, average of 8000 to 10000 square feet
• Maximum cutting rate is 1/8” per pass
• Used for general cleaning of concrete or asphalt including removal of
paint, epoxy, urethane, adhesive, and heavy dirt, grease and oil deposits
• 18 tooth hardened steel, (2” OD x 5/8” ID x 1/4”)
• Average life of 500 to 800 square feet
• Maximum cutting rate is 1/16” per pass
• Used for paint and oil removal, traffic and shop floor safety-line removal,
cleaning and concrete preparation
• 12 tooth, hardened steel (2” OD x 9/16” ID x 1/4”)
• Average life of 500 to 800 square feet
• Maximum cutting rate is 1/16” per pass
• Used to fill empty space between the cutting discs
• 1/2” ID hardened steel
five Tooth carbide Tip Star
Six Tooth carbide Tip Star
18 Tooth Steel Sharp Tooth cutter
12 Tooth Steel Blunt Tooth cutter
Hardened Steel Spacer
Part # 158583
Part # 158584
Part # 158585
Part # 158586
Part # 158575
Scarifier Drum Cutters