MTS Criterion Series 60 User Manual
Page 118
Advertising
5. Select the X Array check box and select Extension in the corresponding drop-down list.
6. In the Y Axis group Display Unit drop-down list, select lbf (pounds force).
7. In the X Axis group Display Unit drop-down list, select in (inches).
8. Click OK. The configured chart appears. If no traces appear in the chart, you may need to select
a test run to show the traces for the compared test runs.
c) Switch views.
118 | MTS Criterion
™
Series 60
Reviewing, Analyzing, and Reporting Data
Advertising