MTS Criterion Series 60 User Manual
Page 55
Advertising
Adjusting Variables and Recalculating Results
You can adjust variables even after a test is run. To do so, enter the corrected value, and then press Enter
to recalculate results. This can be helpful in correcting errors or performing "what if" analysis. If you wish
to revert to the original value, simply click the Reset button.
Saving Display Configurations
Once you have the display configured the way you like it, you can save it so that you switch between
displays.
MTS Criterion
™
Series 60 | 55
System Introduction
Advertising