MTS Criterion Series 60 - Manual (Page 79)

Select the arrow in the lower right corner of the Status panel. Tripped interlocks are indicated with red
boxes.
2. If necessary, correct any interlock conditions.
Some examples of interlock clearing actions are resetting the Emergency Stop button, turning the pump
on, closing the enclosure door, and so forth.
3. Reset the interlocks.
Click the Clear Interlocks button in the Controller panel. If an interlock condition persists, repeat the
steps in this section until all interlock conditions are corrected.
MTS Criterion ™ Series 60 | 79
Running the Example Tension Test