MTS Criterion Series 60 User Manual
Page 45
MTS Criterion Series 60 Systems Handset Description
Description
Control / Screen / LED
Number
Shows the next four lines of text in the display.
Page
1
When illuminated, indicates the machine is active and can
move.
Active
2
The F1 and F2 programmable function keys are designated
as digital inputs to which you can assign test functions. Test
F1 and F2
3
functions can include start test, pause test, hold positions,
and so forth.
Makes fine adjustment of upper crosshead and table. Moving
the wheel towards the display moves the upper crosshead
Thumb-Wheel
4
and table up; moving the wheel away from the display moves
the upper crosshead and table down. The handset must be
enabled for the thumb-wheel to be active.
Pauses the test action. Press this button again for the test to
resume. Testing software must be active.
Pause
5
Stops the test action. Testing software must be active.
Stop
6
RJ-45 connection to the controller.
Connector
7
MTS Criterion
™
Series 60 | 45
System Introduction