Quadrox QGuard Installation Manual - Manual (Page 11)

GuardNVR Installation Manual 11
Version 4.4 Series
2.2 Installing GuardNVR
To install GuardNVR follow the steps below:
1. Insert GuardNVR installation CD/DVD into your CD/DVD-drive.
2. If Autorun is disabled go to My Computer and double-click on the drive icon that
corresponds to your CD-ROM.
3. Wait while installation procedure is loading and click Next button in the screen that
appears.
4. Carefully read the License Agreement and click Yes if you agree.
5. For a default installation, select Typical. For a custom installation, select Custom. Click
next. If you selected custom, you need to define the type of installation in the window
that appears and click Next.
There are three possible options:
Video Server with User Interface Server (default) – Both the video
server and the web application will be installed on the unit.
This is the default installation and recommended if you have only one GuardNVR
system.
Video Server without User Interface Server – Only the Video Server is
installed. This means you have installed the Web Application (User
Interface) on another system.
User Interface Server without Video Server – Only the Web Application
is installed. Ideally this web application will be used as the central web
application for all the GuardNVR systems in your network
You have to choose one of the three options during the installation of your system.
Ask your installer for more information if you didn’t install the system yourself.
Setup Type Selection Screen