Quadrox QGuard Installation Manual - Manual (Page 16)

GuardNVR Installation Manual 16
Version 4.4 Series
2.3.2 Logging on to GuardNVR server
GuardNVR software uses the Windows Authentication system. Since the Windows main
administrator is an administrator of GuardNVR, you are able to log on under its credentials.
If you’re logged on to Windows with an account that is also registered as user in
GuardNVR, you will be logged on automatically when opening the web application.
To create GuardNVR users, see chapter 3.2 Users of the User manual.
2.3.3 Changing password
To change the Administrative password, follow the steps below:
Go to Start -> Control Panel.
When in Control Panel, select User Accounts from the right-hand list.
In the User Accounts screen, select the Administrator user.
Click Change my password link.
Enter your current password.
The default Administrator password is webcctvnvr.
The default Administrator password is webcctvnvr. If you have an ‘AZERTY’
keyboard, it becomes zebcctvnvr. See Chapter 2.4.5 how to change this to Azerty
settings.
Enter a new password and confirm it.
Click Change Password button to save new Administrator account password.
When you change the Administrator password in Windows, the Administrator
password of the GuardNVR application is automatically changed to this password.
This means also that when you change your password in the GuardNVR application,
that your Windows password will be changed automatically!
2.3.4 Setting time
For proper functioning of GuardNVR, it is very important to use the appropriate Time Zone
setting because the movie recordings are always stored in local time This can be done in two
ways, or by the GuardNVR application configuration (See GuardNVR User Manual
Chapter 3.3.10 Time Synchronisation), or by the Windows OS configuration.
We strongly advise you to use the GuardNVR application way as this is the easiest
way to configure your time settings.