Quadrox QGuard Installation Manual - Manual (Page 38)

GuardNVR Installation Manual 38
Version 4.4 Series
and the new disk Disk 1 which is Unallocated and still Unknown. In case the disk is
not yet initialized (see screenshot), initialize the disk by clicking right on Disk 1 and
selecting Initi.
Computer Management Screen
5. In case the disk is not yet initialized (see screenshot above), initialize the disk by
clicking right on Disk 1 and selecting Initialize Disk.
6. Your screen looks now similar to the following screen.
If you want to add your hard disk as:
a. Separate Logical Disk Go to chapter 4.1.2.1 Multiple Logical Disks
b. Extended Disk Go to chapter 4.1.2.2 Single Disk extension