Quadrox QGuard Installation Manual - Manual (Page 34)

GuardNVR Installation Manual 34
Version 4.4 Series
Checking Physical Connection Screen
2.5.3 Remote client test
For remote client testing, follow the steps below:
1. Open a Microsoft Internet Explorer window.
2. Fill in the IP address (e.g.: http://192.168.100.1/guardnvr) or domain name (e.g.:
http://guardnvr.mycompany.com/guardnvr) in the address bar.
3. When accessing the GuardNVR from a specific client computer for the first time,
Internet Explorer will ask you to install and run an ActiveX component (Video Viewer
Component). Follow the on screen instructions to install the component.
If you have problems installing the ActiveX, please make sure first that you have
added the server to the trusted site list of Internet Explorer.
4. A welcome screen should now appear, and you will be prompted for a Login and
Password.
After filling in Logon and Password you should be logged on to the GuardNVR Web
Application.
‘http://192.168.100.1/guardnvr’ is the factory default IP-address for the EU version
of GuardNVR. For US customers the factory default IP-address is
http://192.168.0.199/guardnvr. Please note that your installer could have changed it
to fit the specifications of your own network.