Guardnvr installation manual, Version 4.4 series, Troubleshooting tab screen – Quadrox QGuard Installation Manual User Manual
Page 27
GuardNVR Installation Manual
27
Version 4.4 Series
3.
Choose the Troubleshooting tab and put the hardware acceleration to Full.
Troubleshooting Tab Screen
Sometimes the support department will ask you to put this setting to None in order to
customize your system for particular use scenarios.
Firewall
If you have a personal firewall, configure it according to chapter 2.5.4. The ports for outgoing
connections should be opened.
A personal firewall is included in Windows XP Service Pack 2 or Vista and also in
some virus scanners. Separate firewall software exists as well.
The personal firewall in Windows XP Service Pack 2 and Vista has all outgoing and
necessary incoming connections open by default. No extra configuration is necessary
in this case.
Internet Explorer settings
Make sure that Internet Explorer allows the installation and execution of signed ActiveX
components.
1.
Make sure you are logged on to Windows as an Administrator.
2.
Go to the Tools Menu. Choose Internet Options.
3.
Go to the Security Tab.
4.
Click the Sites button, deselect the https checkbox and add your GuardNVR to the
trusted sites list. Click OK.
5.
Click the Custom level button at the bottom.
6.
Set the following options to ‘enable’ or ‘prompt’:
7.
Download signed ActiveX controls (prompt)