Quadrox QGuard Installation Manual - Manual (Page 9)

GuardNVR Installation Manual 9
Version 4.4 Series
If you have multiple Video Servers installed and have installed a centralized IIS server (On
one of the Video Server or even on a separate PC), then you can connect to each Video Server
by connecting first to the centralized Web Application by typing the IP of that unit. At that
time you can choose which server you want to connect to in the network from the extended
logon screen. In this case you only need to remember one IP address to connect to all your
GuardNVR servers.
This means that when you connect to a Video Server that also has the Web Application
installed you will need the basic logon screen shown below:
Basic Logon Screen
If you want to connect through the centralized Web Server, you have to use the extend logon
screen by clicking Options. There you select or type the video server IP or DNS name:
For more information about the configuration of this setup, see chapter 3.3.7.
Network Video Recorders of the GuardNVR User Manual.
You can choose which server you want to use as the default server to connect to. For
more information, see chapter 3.3.7. Network Video Recorders of the GuardNVR
User Manual.
Extended Logon Screen
When you choose to install and manage the Web Application on your GuardNVR server or
one of your GuardNVR servers, IIS has to be installed as stated before.
If IIS is not yet installed, follow the steps below:
1. Switch on your computer and login as an Administrator.
2. Insert Windows installation CD into your CD/DVD drive.