Quadrox QGuard Installation Manual - Manual (Page 47)

GuardNVR Installation Manual 47
Version 4.4 Series
The installation of the Video Client Component is (semi) automated. When connecting the first
time to GuardNVR, a special screen will be shown. Please follow the instructions:
ActiveX Installation Screen
If necessary, the installation manual and setup of the component can be found in the support
section of
www.webcctv.com .
For version 4.4.0.0 and higher, VC++ 8.0 runtime libraries are required. In case you
don’t have these, use the standalone video client component.