SATEC PM296 - Manual (Page 10)

Chapter 1 Introduction 2
Remote Display Module - Optional
The RPM096 can be equipped with a Remote Display Module (RDM096) that
provides local data display as well as setup capabilities. The RDM096 is
connected to the RPM096 via a conventional DB15 connector (0.4/1.8/3.0 m
cable supplied).
The display is multi-page and is composed of three windows with high-brightness
digital LEDs.
One galvanically isolated direct current voltage input with options 300V, 100V
or 20V.
3 voltage and 4 current galvanically isolated inputs for direct connection to
power line or via potential and current transformers.
Setup is menu driven, with optional password protection.
Two communication ports are available for RS-232/RS-485 and RS-422/RS-
485 standards, with ASCII, Modbus and DNP3.0 protocols. In ASCII and Modbus
protocols, 120 assignable registers allow the user to re-map either register
address accessible in the instrument to the user assignable register area.
Changing setups and resetting accumulated data through communications can be
secured by the password.
6 relays are provided for energy pulsing (KYZ) or alarm and remote control.
12 optically isolated status inputs
are provided for status monitoring with
timestamp and for external demand and time synchronization.
Two optically isolated analog outputs
with an internal power supply are
provided for remote monitoring or control. Current loop options are 0-20mA, 4-
20mA, 0-1mA,
± 1mA.
Real Time Clock is provided in the PM296/RPM096E for date and time stamp
log and demand interval synchronization. Standard or Daylight Savings Time
(DST) with automatic time adjustment is available. DST switch dates can be
configured for the use in different time zones.
The TOU (Time of Use) system:
• up to 16 TOU energy register groups, each of which can be allocated to accumulate
kWh (import and export), kvarh (import and export), kVAh and energy from 12 external
meters through 12 pulse inputs
• up to 3 TOU Maximum Demand register groups, each of which can be allocated to
record maximum kW import and export, kvar import and export, or kVA demand
• sliding window and thermal maximum demand options
• up to 16 tariff energy registers (counters) per group
• up to 16 tariff Maximum Demand registers per group
• up to 16 daily profiles (e.g., 4 seasons, 4 daily profiles per season)
• up to 8 daily start times (tariff changes)
• 2 calendars
• automatically configurable daily and monthly TOU profile log for each allocated energy
and maximum demand register using season energy tariffs