SATEC PM296 - Manual (Page 4)

ii
shorting switches and is secured using an external strain relief to reduce
mechanical strain on the screw terminals, if necessary.
7. Setup procedures must be performed only by qualified personnel
familiar with the instrument and its associated electrical equipment.
8. DO NOT open the instrument under any circumstances.
Read this manual thoroughly before connecting the meter to the current
carrying circuits. During operation of the meter, hazardous voltages are
present on input terminals. Failure to observe precautions can result in
serious or even fatal injury or damage to equipment.
Modbus is a trademark of Modicon, Inc.
BG0260 Rev. C