Sensaphone 1800 - Manual (Page 104)

Sensaphone 1800 Manual
102
represent a negative sign or to represent the [CODE] key when
programming telephone numbers.
Enable/Disable Zones
The is command will toggle the selected zone between the
enabled or disabled state.
Description Touch-Tone Command
Enable/Disable Zone * + Z(0) + (zone number)
Set and Recite High & Low Alarm Limits
The following commands are used to set or recite the Low
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone Low Limit S(7)+L(5)+(zone number)+(value)+ #
Description Touch-Tone Command
What Is Zone Low Limit W(9)+L(5)+(zone number)+(value)+ #
The following commands are used to set or recite the High
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone High Limit S(7)+H(4)+(zone number)+(value)+ #
Description Touch-Tone Command
What Is Zone High Limit W(9)+H(4)+(zone number)+(value)+ #
Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers.
Description Touch-Tone Command
Setting a phone number S(7) + T(8) + (entry 1–8) + (telephone
number) + #
Description Touch-Tone Command
Reciting a phone number W(9) + T(8) + (entry 1–8)