Sensaphone 1800 User Manual
Page 73
Advertising
Chapter 5: Communication Programming
71
Blind Dialing
The 1800 normally checks for a dial tone before dialing. However,
if your telephone system does not produce a dial tone, you can
make the 1800 dial blindly (i.e., without dial tone). To do this,
make the first digit of each telephone number a pause (CODE
1). When the 1800 sees this as the first digit, it will not check
for a dial tone, but dial the number regardless.
Special Dialing Codes for the 1800 are:
Code 1: two second pause
Code 2: Wait for answer
Code 3: Numeric pager type
Code 4: Alphanumeric pager type
Code 5: Alphanumeric pager ID Number
Code 6: Change to Touch-Tone dialing
Advertising