Sensaphone 1800 - Manual (Page 37)

Chapter 4: Zone Programming
35
ENABLE/DISABLE SOUND LEVEL ALARM
This function allows you to enable or disable the sound alarm
for dialout. When enabled, a high sound level at the remote
microphone (optional)—that meets the programmed recognition
time and level
—will trip a sound alarm and the unit will dial out.
Disabling sound will prevent a sound alarm dialout status report.
The default setting is enabled (on).
To enable/disable sound:
1. Press the SENSOR ON/OFF key.
2. Press the Sound Alarm key (9). 1800 will say “Off” to indicate
disabled or “On” to indicate enabled.
3. Repeat the steps to change.