Sensaphone 1800 - Manual (Page 53)

Chapter 4: Zone Programming
51
DESIGNATING A ZONE AS UNUSED
This feature allows you to mark selected Zones as unused, which
will prohibit them from going into alarm and will also leave them
out of the status report.
To designate a Zone as unused:
1. Press the SENSOR ON/OFF key.
2. Press the SET key.
The 1800 will say “Enter Number.”
3. Press the corresponding number of the Zone you wish to mark
as unused.
The 1800 will respond by saying “Off.” Repeat the key sequence to
place the Zone back in use.