Sensaphone 1800 - Manual (Page 58)

Sensaphone 1800 Manual
56
VOICE MESSAGES
The 1800’s digital speech recording feature allows you to record
custom messages for each of the eight Zones and an ID Message.
This means that when 1800 calls you during an alarm, you will
hear a personalized Voice Message telling you exactly what alarm
condition exists. You can record a separate message for each of the
eight Zones. The message can run a maximum of 3.75 seconds. The
ID Message can be a maximum of six seconds.
The ID Message is used to identify the unit. This could be a
particular building name, its location (address or city), or some
other identifier.
To program the ID Message:
1. Locate the condenser mic.
2. Press the SET key.
3. Press the MESSAGE key.
4. Press ID key (number 0 key).
5. When the unit beeps, begin speaking your message into the
microphone. The microphone is located next to the power
switch on the front panel. The unit will say “OK,” when the
recording time has elapsed; then it will play back your recorded
message.