Sensaphone 1800 - Manual (Page 30)

Sensaphone 1800 Manual
28
When preparing wire for connection to the terminal blocks,
strip
4" of insulation from the conductor (see figure below
.25"
.
Figure 6: Wire stripped for connection
LED INDICATORS
The LEDs provide on-site alarm and status information. Listed
below are descriptions of how the LEDs work.
Zones 1–8, Power and Sound:
LED Off: Zone OK
LED Blinking Fast: Alarm condition exists but
recognition time has not been met
LED Blinking Slowly: Unacknowledged alarm exists
LED On: Acknowledged alarm exists
Battery:
LED On: Battery OK
LED Blinking: Battery condition low
Output On:
LED On: Output relay on
LED Off : Output relay off
Phone-In-Use:
LED On: Unit is communicating on the phone line
LED Off: Unit is not using the phone line
System-On:
LED On: System power on
LED Off : System power off