Sensaphone 1800 - Manual (Page 67)

Chapter 5: Communication Programming
65
4. Press CODE 3 (This tells 1800 this is a Numeric pager call).
5. Enter the pager telephone number using the number keys.
6. Press CODE 1 twice.
NOTE: Depending on your pager service, you may
need to insert a longer or shorter delay (additional
pauses). Two pauses is the recommended starting
point. Use the Dial-out Test Mode to help determine
the proper number of pauses for your pager service.
When it is programmed properly, you will hear
the 1800 dial your pager service, then wait (based
on the number of pauses) until the call has been
answered, and then send another series of Touch-
Tones and hang up.
7. Press the ENTER key.
To play back a NUMERIC PAGER number:
1. Press WHAT IS