Sensaphone 1800 - Manual (Page 61)

Chapter 5: Communication Programming
59
ID NUMBER
The ID Number is the identification number of the 1800. This
number is typically the telephone number where the unit is installed,
or it may be designated using any number that best suits your
application. The purpose of the ID Number is to immediately
provide the source of any alarm, especially when using multiple
1800 units in a complex monitoring system. The ID number is
announced during voice alarm messages and displayed on pagers.
The ID Number can be up to 16 digits long.
When the 1800 is called from a remote location, it always begins
its message with the identification number: “Hello, this is (ID
Number).”
To program the ID Number:
1. Press the SET key.
2. Press the ID key (number 0 key).
3. The unit will say “Enter number.” Using the number keys, enter
the unit’s phone number, then press ENTER.
If the number was accepted, the 1800 will say “OK.”