Sensaphone 1800 - Manual (Page 129)

Appendix F: Key Sequence Reference
127
Output Mode Program relay output as manual or automatic for specific zone
[SET] or [WHAT IS] + [OUTPUT] + [mode number]
Default=none
Keypad Unlock Allows programming changes
[WHAT IS] + [ENTER/LOCK] + [4 digit code]
Default=unlocked
Keypad Lock Prohibits programming changes
[SET] + [ENTER/LOCK] + [4 digit code]
Default=unlocked
Press [ENTER] after all Key Sequences starting with [SET].
Use [SET] to establish parameters, [WHAT IS] to verify them.
SPECIAL KEY FUNCTIONS
RING/TAD/*
Used to enter a minus sign for negative alarm limits or calibrations.
DIALOUT CODES
CODE 1 Inserts a 2-second pause; precedes a dialout number for
blind dialing
CODE 2 Inserts a “Wait for answer”
CODE 3 Numeric pager call type
CODE 4 Alphanumeric pager type
CODE 5 Alphanumeric pager ID #
CODE 6 Change to Touch-Tone dialing