Rockwell Automation 20B PowerFlex 700 Installation Instructions - Frames 0…6 - Manual (Page 66)

66 Rockwell Automation Publication 20B-IN019E-EN-P - July 2013
PowerFlex 700 Adjustable Frequency AC Drive – Frames 0…6
Human Interface Module (HIM) Overview
LCD Display Elements
Human Interface Module (HIM) Key Functions
Human Interface Module (HIM) Main Menu
Display Description
Direction ⎥ Drive Status⎥ Alarm⎥ Auto/Man⎥ Information
Commanded or Output Frequency
Programming / Monitoring / Troubleshooting
Key Description
Exit a menu, cancel a change to a parameter value, or
acknowledge a fault/alarm.
Select a digit, select a bit, or enter edit mode in a parameter
screen.
Scroll through options, increase a value, or toggle a bit.
Scroll through options, decrease a value, or toggle a bit.
Enter a menu, enter edit mode in a parameter screen, or
save a change to a parameter value.
Access the function associated with a programming or
numeric key. Refer to the drive user manual for more
information.
Start the drive.
Stop the drive or clear a fault.
Jog the drive.
Change direction. These keys are active only when the HIM is granted Manual Control or
Param. 090 [Speed Ref A Sel] / 093 [Speed Ref B Sel] is set to:
Option 18 “DPI Port 1” for a HIM installed in the drive cover
or
Option 19 “DPI Port 2” for a HIM connected by cable for handheld or
remote installation option
Increase speed.
Decrease speed.
Main Menu Screen Menu Selections
Main Menu:
Diagnostics
Parameter
Device Select
Memory Storage
Start-Up
Preferences
F-> Power Loss Auto
0.0 Hz
Main Menu:
Diagnostics
Parameter
Device Select
Esc
Esc
7 8 9
4 5 6
1 2 3
. 0 +/-
Sel
Jog
Alt
Exp Param #
S.M.A.R.T. View Lang Auto / Man Remove
Human Interface Module (HIM)
Sel
ALT
Jog
F-> Power Loss Auto
0.0 Hz
Main Menu:
Diagnostics
Parameter
Device Select