Rockwell Automation 161 SERIES A - Manual (Page 30)

Bulletin 161
24
Other displays
Display Description
A reset signal has been issued.
The Bulletin 161 drive is in standby mode.
The mains voltage has been switched off.
The waiting time before automatic restart has expired (see parameter b01 - b03 ).
The factory setting has been selected and the drive is in the initialisation phase
(see parameters
b84, b85 ). The parameters for the European market are loaded
No data present (e.g. display under d08 , d09 if the fault indication register is empty or
display under d04 if the PID controller is not active).
- - -
EU
_ _ _