Rockwell Automation 1395 Discrete Adapter, Rev 3.XX-8.XX - Manual (Page 17)

Chapter 4
Installation
4-4
Figure 4.2
Connection of External Devices to the 1395 Drive
Main Control Board
Port A Port B
J6 J7
Adapter Board Adapter Board
TB3
Terminals 1-22 Terminals 23 - 52 Terminals 23 - 52
Wiring to External
Devices
Wiring to External
Devices
or
External wiring is connected to the terminal block at the bottom of the
1395 enclosure. Terminals 23 through 52 are reserved for wiring the
Discrete Adapter board to external I/O devices. Refer to the Discrete
Adapter Block Diagram and Hardware Connection Diagrams
Figure 4.3
through Figure 4.9 , for information on the terminals and corresponding
I/O.