Rockwell Automation 1403-NENET Ethernet Communication Card Installation Instructions - Manual (Page 37)

Publication 1403-IN005A-EN-P
Ethernet Communication Card Data Tables B-23
Table B.21 Log Selection Command Table Write (File N22)
Param. No. Parameter Name Master Module Range Element Range
12.1 Selected Log 23 = Event Log
24 = Min/Max Log
54 = Snapshot V/I Log, or
16, 8, 3 and 7, 1
parameter records
59 = Snapshot Power Log 1 23, 24, 54, 59
12.2 Maximum Number of Data Sets 1 to 100 for Event Log
1 to 84 for Min/Max Log
1 to 50 for Snapshot V/I
Log
1 to 50 for Snapshot
Power Log
1 to 265 for snapshot 16
parameter log
(1)
1 to 489 for snapshot 8
parameter log
(1)
1 to 846 for snapshot 4
parameter log
(1)
1 to 100 for snapshot 7
parameter log
(1)
1 to 845 for snapshot 3
parameter log
(1)
1 to 1861 for snapshot 1
parameter log
(1)
2 1 to 100 for Event Log
1 to 84 for Min/Max Log
1 to 50 for Snapshot V/I
Log
1 to 50 for Snapshot
Power Log
1 to 265 for snapshot 16
parameter log
(1)
1 to 489 for snapshot 8
parameter log
(1)
1 to 846 for snapshot 4
parameter log
(1)
1 to 100 for snapshot 7
parameter log
(1)
1 to 845 for snapshot 3
parameter log
(1)
1 to 1861 for snapshot 1
parameter log
(1)
12.3 Chronology of Returned Data 0 = Reverse
1 = Forward
Note: Not used for Min/
Max Log 3 0 to 1
12.4 First Min/Max Parameter to be Returned 1 to 84 4 1 to 84
12.5
Snapshot Starting Record Offset
(1) 0 to
(parameter 12.2 max - 1) 5 0 to
(parameter 12.2 max - 1)
Reserved Word 6
Reserved Word 7
Reserved Word 8
Reserved Word 9
(1) Available on firmware V3.00 or later.