Rockwell Automation 1403-NENET Ethernet Communication Card Installation Instructions - Manual (Page 9)

Publication 1403-IN005A-EN-P
Product Description 5
4. Apply control power to the Master Module.
5. Press Enter (or Return) on the PC.
6. Follow the on-screen instructions to modify and save the options.
Connections
There are two communication connection types for the 1403-NENET.
•
UTP (10BaseT) - use a standard straight through RJ45 cable to connect
to an Ethernet hub.
•
AUI - attach an Ethernet transceiver to the DB15 connector.
Table 2 Communication Parameters
Parameter Value
Baud Rate 38,400
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
NOTE
The final installation should contain wiring to one port
only.