Plc-5 ethernet operation – Rockwell Automation 1403-NENET Ethernet Communication Card Installation Instructions User Manual
Page 65
Advertising
Publication 1403-IN005A-EN-P
Sample Ladder Listing C-5
transfer sequence must be duplicated in both position 0 and 1 of an
initialization file.
N11 - Configuration Mode
Required numbers are 55, 55, and 52.
N12 - Setpoint Mode
Required numbers are 56, 56, and 52.
N13 - Run Mode
Possible numbers are 40, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
54, 55, 56
PLC-5 Ethernet Operation
The PLC-5/E description, data files and sample ladder logic are the same as the
SLC 5/05 description with the following changes:
1. The message instruction should appear as:
2. The One Shot Instructions is ONS.
3. To support Ethernet connectivity, the file type MG must be used for the
control file.
0008
Advertising