Chapter 2, Receiving and storage, Chapter – Rockwell Automation 1503FC IntelliVAC Contactor Control Module - Series E User Manual
Page 12
Chapter
2
1503-UM053B-EN-P – June 2013
Receiving and Storage
Receiving
Upon receiving the controller, remove the packing and check for damage
that may have occurred during shipping. Report any damage immediately
to the claims office of the carrier.
NOTE: If the IntelliVAC module is an integral component of a
complete MV controller (Bulletin 1500/1900), special receiving and
handling instructions will apply. For details, refer to the service manual
provided with the equipment.
Storage
It is important to consider the following storage requirements if you are
not installing your controller immediately after receiving it.
• Store the controller in a clean, dry, dust-free environment.
• Storage temperature should be maintained between -40°C and 85°C (-
40°F and 185°F).
• Relative humidity must not exceed 95%, non-condensing.