Rockwell Automation 1503FC IntelliVAC Contactor Control Module - Series E - Manual (Page 14)

Chapter
3
1503-UM053B-EN-P – June 2013
Installation and Wiring
General Precautions In addition to the precautions listed throughout this manual, the
following statements, which are general to the system, must be read and
understood.
A T T E N T I O N A T T E N T I O N
The controller contains ESD (electrostatic
discharge) sensitive parts and assemblies. Static
control precautions are required when
installing testing, servicing, or repairing the
assembly. Component damage may result if
ESD control procedures are not followed. If
you are not familiar with static control
procedures, refer to applicable ESD protection
handbooks.
A T T E N T I O N A T T E N T I O N
An incorrectly applied or installed controller
can damage components or reduce product life.
Wiring or application errors, such as incorrect
or inadequate AC supply, or excessive ambient
temperatures, may result in malfunction of the
system.
A T T E N T I O N A T T E N T I O N
Only personnel familiar with the controller and
associated machinery should plan or implement
the installation, start-up, and subsequent
maintenance of the system. Failure to do this
may result in personal injury and/or equipment
damage.
Safety and Codes