Rockwell Automation 1441-DYN25-MRUC Run Up Coast Down Extension Module for the Dynamix 2500 - Manual (Page 21)

Rockwell Automation Publication 1441-UM006A-EN-P - May 2011 21
Run Up/Coast Down Extension Module Chapter 2
The resulting time waveform is recorded as a Microsoft Windows .wav file
and the Acquisition Completed dialog appears on the screen.
6. Press F4 (OK) to continue.
The RUCD - Display Select screen appears.
The Dynamix 2500 data collector provides five different formats for you to
use to view the newly recorded time waveform.
7. Select the format and press F3 (Display).
TIP If an error occurs during data collection, a message
appears in this dialog box.
Format Description
Bode Displays the magnitude and phase over a varying rpm.
See Displaying Measurements by Using a Bode Plot on page 22 .
Nyquist Displays the selected orders as complex data.
See Displaying Measurements Using a Nyquist Plot on page 25 .