Recall a setup – Rockwell Automation 1441-DYN25-MRUC Run Up Coast Down Extension Module for the Dynamix 2500 User Manual
Page 41
Advertising
Rockwell Automation Publication 1441-UM006A-EN-P - May 2011
41
Run Up/Coast Down Extension Module Chapter 2
Recall a Setup
You can recall a previously saved setup and use it to collect another measurement.
The setup may have been saved only as a setup, or may have been saved with the
recorded data.
Save Run Up/Coast Down Measurements on page 40
for more information.
Follow these steps to recall a setup.
1.
Select RUCD on the Main Menu and press Enter.
The RUCD screen appears.
2.
Select Recall and press Enter.
The RUCD - Load Setup screen appears.
Advertising