Rockwell Automation 1441-DYN25-MRUC Run Up Coast Down Extension Module for the Dynamix 2500 - Manual (Page 43)

Rockwell Automation Publication 1441-UM006A-EN-P - May 2011 43
Run Up/Coast Down Extension Module Chapter 2
Review Run Up/Coast
Down Measurements You can review previously saved RUCD measurements with the Dynamix 2500
data collector. The instrument saves the recorded data in the form of a time
waveform (.wav file).
Follow these steps to review an RUCD measurement.
1. Select RUCD on the Main Menu and press Enter.
The RUCD screen appears.
2. Select Review Data and press Enter.
The RUCD - Review Data screen appears.
3. Select the filename that you want review and press F3 (Open).
If you select a .wav file, the RUCD - WAV Setup screen appears. Otherwise
the appropriate plot setup screen appears.